Gage Bilt GB714 Manuale di istruzioni originale - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni originale per Utensile elettrico Gage Bilt GB714. Gage Bilt GB714 20.

When the actuator assy-air is depressed, the pressurized air inside of the tool is released allowing spring pressure to move the valve

spool assy causing the air to be redirected. The air is directed to the top of the air piston assy, moving it in a downward direction.

The air below the air piston assy is then directed through the valve sleeve and exhausted out of the bottom of the tool. Simultaneously,

the piston rod assy, connected to the air piston assy, is also moving down, forcing hydraulic oil up and into the front side of the head

cylinder assy, causing the piston to move to the rear of the head cylinder assy. The internal components of the attached nose assembly

are also moving with the piston to start the fastener installation. When the fastener installation is completed, the actuator assy-air is

released. Air pressure is then built up inside of the handle assy causing the valve spool assy to return to its original position and

reversing the sequence directing air pressure to the rear of the head cylinder assy, causing the piston to move to the forward position.

Air exhaust

Piston Rod Assy

moves down

Air Piston

moves down

GB714 INSTALLATION TOOL

S/N: 1001 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

PRINCIPLE OF OPERATION

PULL Cycle

Air exhaust

Pressurized Oil

Unpressurized Oil

Images may not reflect actual tool.

Piston Rod Assy

moves up

Air Piston

moves up

Pressurized Air

Unpressurized Air

RETURN Cycle

Air exhaust

REV. 3/21