Gage Bilt GB722 Manuale di installazione - Pagina 9
Sfoglia online o scarica il pdf Manuale di installazione per Utensile elettrico Gage Bilt GB722. Gage Bilt GB722 13. Installation tool
Anche per Gage Bilt GB722: Manuale di istruzioni originale (20 pagine), Manuale di istruzioni originale (20 pagine)
Stampa la pagina
HEAD
Remove nose assembly from tool before attempting disassembly of head cylinder assembly (752119). Remove end cap (722317).
Push against threaded end of piston (752507) to slide it out of head cylinder assy (752119). Be careful not to damage threads or cause
burrs on polished piston rod surface.
WARNING:
Dispose of Hydraulic Oil in accordance with applicable regulations.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.)
Apply Loctite® #242 and torque the four socket-head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the
gasket (704129).
S/N: 1753 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
9
REV. 1/15