5th Wheel M1 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Scooter 5th Wheel M1. 5th Wheel M1 17.

8 Indication Description
Automatic cruise indication:
Start
When automatic cruise is turned on, the
indicator will be on for a long time.
Headlamp status indication:
Start
When the headlight setting is turned on,
the indicator will be on for a long time.
Third gear indication:
First gear
The first gear is open
The second gear is open
20
Shut down
When automatic cruise is turned off,
turn off the indicator.
Shut down
Turn off the indicator when the headlight
setting is turned off.
Second gear
Third gear
The third gear is open
Error Indication
If there is anything abnormal about the scooter, the warning indicator will flash, with the flashing
value E1-E6 displayed.
Errors
Code
Please check whether the taillight is on. If it is off, it means that the power supply is insufficient.
Communication
E1
Please replace the controller or the LED display. If it is on, please check whether the connecting
Fault
wire between the controller and the LED display is open-circuit.
Brake failure
E2
Please check whether the
brake is pressed.
Please check whether the
Throttle Failure
E3
throttle is pressed.
Motor Fault
E4
Check whether the motor
and controller wire is
connected correctly.
Controller failure
E5
If the controller is damaged, please replace the controller.
Check whether the motor
Overheated Motor
E6
temperature is too high.
Solutions
Press and release the brake to reset the brake.
If not, please check whether the
If it is open-circuit or short-
connecting wire between the
circuited, please replace the
connecting wire.
brake and the LED display is
short-circuited or open-circuit.
Replace the brake handle.
Press and release the throttle to reset the throttle.
If it is open-circuit or short-
If not, please check whether the
connecting wire between the
circuited, replace the connecting
throttle and the LED display is
wire.
short-circuited or open-circuit.
Replace the throttle.
If it is not connected correctly, please adjust and connect the motor and the
controller correctly.
If it is connected correctly, please disconnect the connecting wire
and measure whether the internal resistance between the
three-phase wires of the motor is within a reasonable range,
generally within 0.1Ω-1Ω. If it exceeds the range, the motor needs
to be replaced.
If the motor temperature is too high, please wait for the motor to
cool to the appropriate working temperature.
If the motor temperature is normal, check whether the connecting
wire of the controller is short-circuited. If it is short-circuited,
please replace the connecting wire.
21