Dawnco STARLOOK- D Manuale - Pagina 12

Sfoglia online o scarica il pdf Manuale per Unità di distribuzione dell'alimentazione Dawnco STARLOOK- D. Dawnco STARLOOK- D 16.

Atten

DiSEqC

Memory

Digital – Analog Use this button to step between analogue and digital multi-

0. 13/18V

Adjusting of 13V alt. 18V. Selected position is displayed up to the left in the LCD-display.

#. 22 kHz

Adjusting of 22 kHz on/off. Selected position is displayed up to the left in the LCD-display.

DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • [email protected]

Turn off the function by pressing the button again (no hold).

Attenuator 15 dB on/off. Indication on/off in the monitors

upper right hand corner.

Chose between the different DiSEqC commands by using the buttons

on the side of the instrument.

Submenu 7 (SWx) shows the extended DiSEqC-commands

(DiSEqC 1.1).

Submenu 8 (Motor) shows the command-list for DiSEqC actuator-

control (DiSEqC 1.2).

Even 13/18V and 22 kHz can be adjusted under the DiSEqC-menu.

A multi channel measuring can be stored. Chose button nr 6 (Memory).

Select the memory-position where to store the data with the main-knob

(pos: 00-99) and push button nr 2 (save). The data is stored.

Load measured data by first choosing the memory position with the

knob (pos: 00-99).

Push button nr 1 (load) and the memory is displayed on the monitor.

Delete measured data by first selecting the memory position to be

deleted (pos:00-99) Push button nr 3 (delete) and the data is deleted.

channel measuring.

Again, 10 pages of both ana/digi-signals with up to 10

frequencies per page can be stored.

(11)