Dyna-Glo RMC-FA150NGDGD Istruzioni per l'uso e manuale delle parti

Sfoglia online o scarica il pdf Istruzioni per l'uso e manuale delle parti per Riscaldatore a gas Dyna-Glo RMC-FA150NGDGD. Dyna-Glo RMC-FA150NGDGD 11. Natural gas construction heater
Anche per Dyna-Glo RMC-FA150NGDGD: Istruzioni per l'uso e manuale delle parti (10 pagine)

Dyna-Glo RMC-FA150NGDGD Istruzioni per l'uso e manuale delle parti
Operating Instructions & Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and
others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for
future reference.
Dyna-Glo
Gas Construction Heater

Description

Dyna-Glo Delux model RMC-FA150NGDGD is a natural gas fired construction
heater, having a built-in thermostat, and a 150,000 BTU/Hr rating. The heater
uses natural gas for com bustion and electricity to operate the motor and fan.
It is primarily to be used to temporarily heat well-ventilated buildings under
construction, alteration or repair. This heater should be utilized in sheltered, well-
ventilated areas, but never in occupied dwellings.

Specifications

Output Rating
Model
BTU/Hr
RMC-FA150NGDGD
150,000
Manifold
Model
Pressure
RMC-FA150NGDGD
4" W.C.
Model
Ignition
RMC-FA150NGDGD
Continuous spark

Table of Contents

Description . . . . . . . . . . . . . . . . . . . . . . .1
Specifications. . . . . . . . . . . . . . . . . . . . . .1
Unpacking . . . . . . . . . . . . . . . . . . . . . . . 1
General Safety Information . . . . . . . . 1-3
Principals of Operation. . . . . . . . . . . . . .3
Ventilation. . . . . . . . . . . . . . . . . . . . . . . .3
Installation. . . . . . . . . . . . . . . . . . . . . . . .4
Operation . . . . . . . . . . . . . . . . . . . . . . . .4
Maintenance . . . . . . . . . . . . . . . . . . . . 4-5
Storage . . . . . . . . . . . . . . . . . . . . . . . . . .5
Wiring Diagram. . . . . . . . . . . . . . . . . . . .6
Repair Parts Illustration . . . . . . . . . . . . .7
Repair Parts List. . . . . . . . . . . . . . . . . . . .7
Troubleshooting Chart . . . . . . . . . . . . . .8
Air Quality Hazard . . . . . . . . . . . . . . . . .9
Warranty . . . . . . . . . . . . . . . . . . . . . . . .10

Unpacking

1. Unpack all materials used to protect
the heater inside of carton. Retain
plastic caps attached to exposed
fittings for use during storage.
Delux Natural
®
C
US
ANS Z83.7-2017 CSA 2.14-2017 Construction Heater
Fuel
Fuel
Consumption
Natural Gas Only 146 Cubic ft/h
(4.13 m
/h)
3
Maximum Supply
Minimum Supply
Pressure to Heater
Pressure to Heater
1/2 PSI
5" W.C.
Spark Plug
Gap (Inches)
.12
(3.05 mm)
Page
2. Remove heater, accessories and all
hardware from carton.
3. Inspect all items for damage that may
have occurred during shipment.
Important Safety Information
Make certain you read and understand
all warnings. Keep these instructions for
reference. They are your guide to safe
and proper operation of this heater.
Safety information appears throughout
these instructions. Pay close attention
to them. Below are definitions for the
safety information listed throughout
this manual.
DANGER
Indicates an
im minen tly
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
WARNING
Indicates a poten­
tially hazardous
Printed in China
Figure 1 - Model RMC-FA150NGDGD
US
Hot Air Output
(CFM Approx)
Motor
435
3440 RPM
Temperature
Control
Built-In Thermostat
Size
L x W x H (Inches)
25 x 9.4 x 15.0
(63.5 x 23.9 x 38.1 cm)
situation which, if not avoided, COULD
result in death or serious injury.
CAUTION
situa tion which, if not avoided, MAY
result in minor or moderate injury.
IMPORTANT: Not every possible cir-
cumstance that might involve a hazard
can be anticipated. The warnings in this
manual and on tags or decals affixed to
the unit are therefore not all-inclusive.
If a procedure, work method, or oper-
ating technique not specifically recom-
mend ed by is used, you must make sure
it is safe for you and others.
You should also ensure that equipment
will not be damaged or made unsafe by
the operating or maintenance method
you choose.
Consumer: Retain this manual for future
reference.
RMC-FA150NGDGD
Electric Motor
Input
Amperage
120V/60Hz, 1/9 HP 0.7
Indicates a poten­
tially hazardous
PROFESSIONAL GRADE
IMNGF150DGD - KJY