Hi-Force ATDP125 Manuale di istruzioni per l'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Pompa dell'acqua Hi-Force ATDP125. Hi-Force ATDP125 15. Air driven hydrotest pumps
Anche per Hi-Force ATDP125: Manuale di istruzioni (9 pagine)
Stampa la pagina
Max air consumption:
6 m³ (212scfm) at 7 bar.
A minimum supply pipe bore of ½" diameter is required to allow the pump to operate correctly.
Fluid inlet port:
1" BSP (All models)
Outlet Port:
ATDP63 = ½" NPT
ATDP125 = ½" NPT
ATDP216 = 1.1/8" -12 UNF
Pump operating temperatures:
-20c to +50c
Noise level:
An average A-Weighted sound pressure level of 75dB was measured for undefined workspaces, as per
Directive 2006/42/EC Section 1.7.4.2 (u).
Recommended Fluids:
• De-ironised / De-minerelised water.
• Water Glycol
• Hydraulic oil (see chart below)
Hi-Force tools use 2 grades of hydraulic oil, dependant on the tool.
ISO Hydraulic oil grade
ISO15
ISO46
IMPORTANT:
If in doubt about the suitability of the operating fluid you intend to use, please consult
your nearest Hi-Force office or distributor. Use of unsuitable operating fluids WILL void your
warranty.
Operating Instruction Manual:
OM-ATDP-01
1.0 Specifications
Temperature range Degrees Celcius
From:
-23
-2
3
From Serial Number:
All
To:
44
73