Dyna-Glo DGY784BDP Manuale - Pagina 9

Sfoglia online o scarica il pdf Manuale per Allarme fumo Dyna-Glo DGY784BDP. Dyna-Glo DGY784BDP 15. Vertical gas smoker

ASSEMBLY INSTRUCTIONS

1. Attach the legs.

Align one leg (A) with mounting holes on the

bottom of the smoker body (I). Thread screws

through holes from outside of unit. Nuts are

pre-welded to the cabinet. Repeat for other

3 legs (A). Tighten all screws (AA) with a

Phillips screwdriver.

Hardware Used

M6x12 Screw

2. Attach the burner and control unit.

Open the bottom door of the smoker body (I).

Turn the burner and control unit (B) upside

down and place it on the bottom of the smoker

body (I), making sure the 4 mounting holes on

the burner and control unit (B) are aligned with

the holes on the smoker body (I). Note: The

control knob should be on the same side as the

door. Check that the burner is properly installed

on the orifice before attaching the burner and

control unit (B). Thread bolts (AA) through holes

from outside of unit. Securely tighten the unit

to the bottom with a Phillips screwdriver.

Hardware Used

M6x12 Screw

x12