Airwheel SE3 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Sedia a rotelle Airwheel SE3. Airwheel SE3 15.

Custom coded lock instruction

The original password is 0-0-0, set your own password, follow these steps:

1.Dial the password to the original password: 0-0-0;

2.Press the button A with a pen or other tool until you

hear the 'tick' sound;

3.Dial the password wheel B to set your own password,

for example: 8-8-8;

4.Push button C in the direction of the arrow and hear the "tick" sound

again. Button A pops up and the password is successfully set.

Now you have completed your password setup, please keep it in mind. If you need to reset your password,

repeat the above steps.

Battery removal instructions

Before removing, check whether the power is off, open the box, pull

open the lining zipper, open the inner lining, unplug the battery cable,

pull out the cloth tape outside the battery box forcefully, and the battery

will be lifted up and remove the battery.

(When the battery is taken out for the first time, the fixed tie on the

battery box needs to be cut and removed.)

Battery Extension Cable Instructions (Optional)

When the battery is removed for charging, connect the battery and charger as shown below.

Connect battery

Battery connector terminal plug Note：

When inserting the battery cable terminal, please make sure

the terminal "+" pole to the "+" pole, "-" pole on the "-" pole (see

right diagram); never insert positive to negative poles.

WARNING

Battery wiring

- 06 -

Connect charger

battery box

battery

tie

cloth bag