Gaggenau CE291 Series Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Piano di cottura Gaggenau CE291 Series. Gaggenau CE291 Series 16. Glass
Anche per Gaggenau CE291 Series: Manuale di istruzioni (16 pagine)
Stampa la pagina
en Familiarising yourself with your appliance
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
4.2 Indicators/symbols
The displays show selected values and functions.
Display
Name
-
Heat settings
/
Residual heat
PowerBoost function
Timer
4.3 Touch fields
Touch fields are touch-sensitive surfaces. To select a
function, touch the relevant field.
Touch field
1|2|3|4|
Notes
¡ Always keep the control panel dry. Moisture impairs
the function.
¡ Do not pull pans close to the displays and touch
fields. The electronics may overheat.
4.4 Hotplates
You can find an overview of the different activations of
the hotplates here.
If you operate the activations, the relevant displays light
up.
6
Name
Main switch
Wipe protection/Child-
proof lock
Automatic zone control
PowerBoost function
Hotplate selection
Settings range
Sensor frying system
Timer
Hot-
Name
plate
Single-circuit
hotplate
Dual-circuit
hotplate
Tri-circuit hot-
plate
Roaster hot-
plate
Notes
¡ Dark areas in the glow pattern of the hotplate are
part of the technical design. They do not affect the
functionality of the hotplate.
¡ The hotplate regulates the temperature by switching
the heat on and off. The heat may also switch on
and off when on the highest setting.
Reasons:
– Easily damaged components are protected
against overheating.
– The appliance is protected from electrical over-
load.
– This achieves a better cooking result.
With multi-circuit hotplates, the heating of the hot-
plate and the activated areas may switch on or off
at different times.
Activating and deactivating
Select the hotplate. Touch
.
Select the hotplate.
¡ Touch
.
Second filament circuit is
activated.
¡ Touch
again.
Third filament circuit is
activated.
Select one of the two roaster
hotplates.
¡ Touch
.
Second hotplate and
roaster are activated.