Agrident APR500 Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Scanner Agrident APR500. Agrident APR500 14. Weight from scale
Anche per Agrident APR500: Manuale (9 pagine)

APR500 – Weight from scale
Weight from scale
Now you can decide whether to configure Hotkey A or Hotkey B.
Now you can decide whether to configure Hotkey A or Hotkey B.
We will use Hotkey A for this example
l use Hotkey A for this example, so please proceed with
The following screen will be displayed:
The following screen will be displayed:
Please go to Weight from
Weight from scale using the
You have to set the value to "On" using
You have to set the value to
If you go back to the main display you can see that the functionality of Hotkey A has
If you go back to the main display you can see that the functionality of Hotkey A has
If you go back to the main display you can see that the functionality of Hotkey A has
changed form "Read"
Now the APR500 will request the weight after the EID scan if the scan is activated via
Now the APR500 will request the weight after the EID scan if the
Hotkey A. The same could be applied to Hotkey B, of course.
Hotkey A. The same could be applied to Hotkey B, of course.
4.1 Weight from scale an

Weight from scale and Assign mode

Please not
Please note that Weight from scale is incompatible with the
mode,
setting but never for both simultaneously.
setting bu
If the corresponding Hotkey is configured to any Assign mode and you try to a
If the corresponding Hotkey is configured to any
Weight from Scale for this Hotkey, the foll
Now you can either confirm with activating
Now you can either confirm with activating Weight from scale via
Hotkey mode will be set to
will be set to No Action Code - or you cancel the activation pressing
If Weight from scale is already activated
modes to the same Hotkey – the corresponding menu items are not available in the
modes to the same Hotkey
mode submenu in this case.
submenu in this case.
09.03.2011
to "Scale Read".
so you can configure one Hotkey for either one or the other
o you can configure one Hotkey for either one or the other
for this Hotkey, the following message will be displayed:
owing message will be displayed:
is already activated, it will no be possible to select one of the
it will no be possible to select one of the Assign
.
/
buttons and enter the menu with
nter the menu with
/
- confirm pressing
is incompatible with the Assign
mode and you try to activate
you cancel the activation pressing
ot available in the Hotkey
.
.
scan is activated via
- in this case the
.
Page 7 of 14