6KU FIXIE Manuale di costruzione passo dopo passo - Pagina 11
Sfoglia online o scarica il pdf Manuale di costruzione passo dopo passo per Moto 6KU FIXIE. 6KU FIXIE 17.
Stampa la pagina
- 1. Table of Contents
- 2. Tools
- 3. Let's Get Started
- 4. Installing the Handlebar
- 5. Installing the Front Wheel
- 6. Aligning the Stem
- 7. Installing the Seatpost
- 8. Optimizing the Brake Pads
- 9. Preparing Pedals for Installation
- 10. Installing the Pedals
- 11. Pumping the Tires
- 12. Let's Finish up that Handlebar
- 13. Optional Fixed Gear/Freewheel
- 14. Contact Information
INFLATING THE TIRES
a.
First remove the valve cap.
b.
Then unscrew the presta valve nut.
c.
Now, insert your pump head onto
the presta valve and inflate your tire
between 90 - 100 PSI.
d.
Retighten the presta valve nut.
e.
Replace the valve cap.
f.
Repeat the same process on the rear
wheel.
10