Airwheel Q3 Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Bicicletta Airwheel Q3. Airwheel Q3 19.
Anche per Airwheel Q3: Illustrazione del prodotto (2 pagine)
4.2 Getting Started
Place Airwheel vertically on the ground and tum it on. The Power Level LED Indicators
will be on and the buzzer will beep, and the unit is ready to use.
If Airwheel tilts either forward or backward after powered on, please wait until it
adjusts to upright position before riding.
4.3 Power level
A four-bar LED indicator is applied to indicate the power level. All fours will be lit when
power level is over 85% and will go off one by one as the level drops. Please check
power level every time before usage to ensure there is enough power for a return trip.
You may recharge it every time after usage.
When power level falls lower than 15%, all four ligh1s will blink and the buzzer will beep.
The front end of the pedal will rise to force you to decelerate and eventually slop.
Please do not attempt to ride again, otherwise you may suffer a sudden loss of power
and fall over.
Duration range will be limited during winter, since the battery performance drops
sharply in cold weather. For instance, at -15t, the discharge capacity is only about half
compared to that at room temperature.
4.4 Speed Control
To prevent injuries caused by over speed, Airwheel sets a maximum speed. When
speed exceeds 12km/h, the front end of the pedal will rise gradually and when the
speed exceeds 16km/h, the pedal will pose a 10' angle to the leveling surface, which
stop you from inclining further to accelerate. The pedal will flatten itself gradually as
the speed decreases.
Please do not lean further to accelerate when approaching the
NOTE:
maximum speed.
4.5 Tilting Protection
Battery level indicator
Web:
www.airebike.com
Email: [email protected]
8