Great Lakes Biostar V Manuale operativo - Pagina 12

Sfoglia online o scarica il pdf Manuale operativo per Apparecchiature dentali Great Lakes Biostar V. Great Lakes Biostar V 16.

There are three options to program the heating and cooling times:

1. Bar Code Scan: (introduced 5/10) The bar

code scanner automatically enters the correct

processing information for your material. Press

the "Code" button to activate the scanner.

Great Lakes Material: The bar code is

located on the box. Hold the box under

the scanner until you hear a "beep"

indicating the bar code has been read.

The heating code will automatically

show on the display.

Scheu Material: The bar code is printed

directly on the material. Hold the

material under the scanner until you hear

a "beep" indicating the bar code has been

read. The heating code will automatically

show on the display.

2. 3 – Digit Code: The code and recommended

heating times are identified on each box of

material. The codes indicate the length of time

for the heating and cooling phase. To program

the code, press the "Code" button, input the

desired three-digit code, and press the "Code"

button again to enter.

3. Manual Entry: To heat the material, press the

button marked "Time", enter the desired heat-

ing time, and press the "Time" button again.

You are now ready to heat the material. The

Biostar display provides instructions throughout

the process.