Great Lakes XTREME GLUPS-STLI Manuale d'uso e installazione - Pagina 4
Sfoglia online o scarica il pdf Manuale d'uso e installazione per UPS Great Lakes XTREME GLUPS-STLI. Great Lakes XTREME GLUPS-STLI 12. Standy lithium ion ups
Stampa la paginaStandby Lithium Ion User's Manual
Connecting the Loads
Plug the loads to be supported by the UPS into the output receptacles on the front of the UPS. Simply turn the
power switch on the UPS on and the devices connected to the UPS will be protected by the UPS unit.
Turn UPS ON / OFF
To turn the UPS unit on, press the power button on the UPS and hold for three seconds. To turn the UPS unit
off, press the power button and hold for one second.
Connecting Local Monitoring Software (optional)
If it is desired to use the Local Monitoring Software, and if your UPS is equipped with USB communications, con-
nect a USB cable from your computer to the UPS, and install the software from the CD.
5. Indicators & Alarm Conditions
Condition
AC mode
Battery mode
Low battery mode
Fault
Alarm for over temperature protec-
tion
6. Important Safety Instructions
(Save These Instructions) This manual contains important instructions for the STLI-035-120/240
and STLI-060-120-240 that should be followed during installation and maintenance of the UPS
CAUTION! (UPS having Internal Batteries):
energized from the battery supply even when the input AC power is disconnected.
CAUTION! (No User serviceable Parts):
parts inside. Refer servicing to qualified service personnel.
CAUTION! (Non-isolated Battery supply):
hazardous voltage may exist between battery terminals and ground. Test before touching.
WARNING!
Unit intended for installation in a controlled environment.
CAUTION!
Do not dispose of batteries in a fire, the battery may explode.
CAUTION!
Do not open or mutilate the battery, released electrolyte is harmful to the skin and eyes.
CAUTION:
A battery can present a risk of electrical shock and high short-circuit current. Contact with any
• part of a grounded battery can result in electrical shock. The following precautions should be observed
• when working on batteries:
A. Remove watches, rings, or other metal objects.
B. Use tools with insulated handles.
C. Wear rubber gloves and boots.
D. Do not lay tools or metal parts on top of batteries.
Great Lakes Data Racks & Cabinets
Visual Indicator
LED illuminated
LED flashes every 10 seconds
LED flashes every 1 second
LED is illuminated
LED flashes every 0.5 seconds
Risk of electrical shock – Hazardous live parts inside this unit are
Risk of electrical shock, do not remove cover. No user serviceable
Risk of electric shock, battery circuit is not isolated from AC input,
Alarm
No Audible Alarm
Audible Alarm sounds every 10
seconds
Audible Alarm sounds every 1
second
Audible Alarm is continuous
No Audible Alarm
Page 4