Gaggenau VI 230 620 Manuale di istruzioni per l'installazione - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Piano di cottura Gaggenau VI 230 620. Gaggenau VI 230 620 10.

en-us

Before you begin

T ools and parts needed

B e f o r e y o u b e g i n

▯

Phillips Head Screwdriver

Pencil

▯

Drill with ¼" (6 mm) bit

Jigsaw

▯

Tape Measure

▯

Note: Additional materials may be necessary for

installation in solid surface countertops. Contact the

countertop manufacturer.

The distance from the top of the cooktop to the bottom of

cabinets above must be a minimum of A=30" (762 mm).

This distance can be reduced to A=24" (610 mm) when

the bottom of the wood or metal cabinet is protected by

not less than ¼" (6.35 mm) flame-retardant millboard

covered with not less than no. 28 gauge sheet metal,

0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm)

aluminum or 0.020" (0.5 mm) copper.

Verify that the cabinets above the cooktop are a maximum

of B=13" (330 mm) deep.

WARNING

To reduce the risk of ignition of surrounding

combustible materials, install at least 2" (51 mm)

from both sidewalls and the rear wall.

The countertop must be level and horizontal. The stability

of the countertop must be maintained after the cut-out

has been made.

Solid surface countertops often require special

installations. For example, heat-reflective tape and

rounded corners may be necessary. Contact the

countertop manufacturer for instructions specific to your

countertop.