Dynabrade 50320 Manuale di avvio rapido - Pagina 4
Sfoglia online o scarica il pdf Manuale di avvio rapido per Sander Dynabrade 50320. Dynabrade 50320 4. 4 1/2"- 5" pistol grip disc sander
Stampa la pagina
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Disassembly/Assembly Instructions
To Assemble:
1. Place machine housing in soft jaw vise. Be sure not to over tighten to prevent damage.
2. Install motor assembly into housing.
3. Screw 55029 Cover onto housing turning counterclockwise. Torque to 28 N•m/250 in. - lbs.
4. Replace 57066 Muffler Body.
5. Replace 56028 Muffler Cap onto muffler body.
6. Apply a small amount of #271 Loctite
7. Lubricate motor by applying 2 or 3 drops of Dynabrade Air Lube P/N 95842 (or equivalent) into air inlet.
8. Complete assembling by remounting Disc assembly or Roloc
Tool Assembly Complete. Please allow 30 minutes for adhesives to cure before operating tool.
Important: Motor should now be tested for proper operation at 90 PSIG. If motor does not operate properly or operates at a higher RPM than marked on the
tool, the tool should be serviced to correct the cause before use. Before operating, place 2-3 drops of Dynabrade Air Lube (P/N 95842) directly into air inlet
with throttle lever depressed. Operate tool for 30 seconds to determine if tool is operating properly and to allow lubricating oils to properly penetrate motor
Loctite
®
is a registered trademark of Loctite Corp.
Dynaswivel
Swivels 360° at two locations which
allows an air hose to drop straight to the
floor, no matter how the tool is held.
•
94300 1/4" NPT
4" Diameter Scotch-Brite Roloc Discs
Grit
Part No.
4" Dia. Regalite Polycut 785C Roloc Discs
Grit
4" Disc Unit = 100 Discs
Part No.
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2007
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
®
(or equivalent) to the threads of 56023 Inlet Bushing. Install inlet bushing into housing torque 23 N•m/200 in. - lbs.
®
Pad and 53163 Side Handle.
Accessories
®
Abrasives
Medium
Coarse
SE
90868
90867
90863
36
60
80
92047
92049
92050
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
PRINTED IN USA
(continued)
96047 Motor Tune-Up Kit
4-1/2" Ceramic Coated Aluminum Oxide Discs
Flange Mounted / 5/8" Center Hole
Grit
Part No.
Unit = 100 Discs
Spiralcool is a registered trademark of Spiralcool Co.
Regalite, Scotch-Brite and Roloc are registered trademarks of 3M Co.
Email: [email protected]
•
Includes assorted parts to
help maintain and repair motor.
50
80
100
120
92052
92053
92054
92055
DYNABRADE
PD07.29_08/07
®