Dynabrade 50348 Manuale operativo

Sfoglia online o scarica il pdf Manuale operativo per Sander Dynabrade 50348. Dynabrade 50348 4. 2 hp right angle disc sander

Stampa la pagina

2 hp Right Angle Disc Sander

Depressed Center Wheel Grinder

Safety, Operation and Maintenance – Save This Document and Educate All Personnel

Model

RPM

50348

6,000

GRINDER

Find The Most Current Offering of Support Documents and Accessories at www.Dynabrade.com

Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel as

well as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Standards Institute

(ANSI). Safety Requirements for the Use, Care and Protection of Abrasive Wheels – ANSI B7.1, and Safety Requirements for Abrading

Materials with Coated Abrasive Systems – ANSI B7.7, Compressed Air and Gas Institute (CAGI) Safety Code for Portable Air Tools –

B186.1, Code of Federal Regulation – CFR 29 Part 1910, International Organization for Standardization (ISO) Hand Held Non-Electric

Power Tools – Safety Requirements ISO 11148 series and applicable State and Local Regulations.

Read and understand tool manual before work starts

to reduce risk of injury to operator, visitors, and tool.

Ear protection to be worn when exposure to sound,

exceeds the limits of applicable Federal, State or

local statues, ordinances and/or regulations.

Respiratory protection to be used when exposed to

contaminants that exceed the applicable threshold

limit values required by law.

Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects

or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints

• Crystalline silica from bricks and cement and other masonry products

• Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Carefully Read and Understand the General

and Grinder sections found in Tool Safety and

Operating Guidelines (PN00001676) Before

Handling or Using Tool.

Tool Intent: Depressed Center Wheel Grinders are intended for use in industrial applications and used only by skilled, trained professionals in

accordance with the instructions in this manual. This pneumatic tool is designed for grinding a variety of materials including metal,

stone, fiberglass or plastic surfaces using 7/8" center hole type 27 reinforced grinding wheels.Use in any other manner or with

other accessories could lead to unsafe operating instructions.

DO NOT USE Tool for Anything Other Than Its Intended Applications.

Training: Proper care, maintenance, and storage of your air tool will maximize tools performance and reduce chance for accident.

Employer's Responsibility: Provide operators with safety instructions and training for safe use of tools and accessories.

Report to Your Supervisor any Condition of the Tool, Accessories or Operation you Consider Unsafe.

Spindle

5/8"-11 Male

SAFETY and OPERATING INSTRUCTIONS

WARNING

Eye protection must be worn at all times,

eye protection to conform to ANSI Z87.1.

Practice safety requirements. Work alert, have proper

attire, and do not operate tools under the influence

of alcohol or drugs.

Air line hazard, pressurized supply lines and flexible

hoses can cause serious injury. Do not use damaged,

frayed or deteriorated air hoses and fittings.

Carefully Read all instructions before operating or servicing

any Dynabrade

Abrasive Power Tool. Products offered by

Dynabrade are not to be modified, converted or otherwise

altered from the original design.

PD22-07

September, 2022

Replaces PD04-51