Gaggenau DI 230 Manuale di istruzioni per l'uso - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Lavastoviglie Gaggenau DI 230. Gaggenau DI 230 19.
Stampa la pagina
Washing dishes
Reduce costs!
If only a small number of dishes have been loaded into
the dishwasher, selecting a programme that operates
at the next lowest temperature will usually suffice.
Programme data
The stated programme data are based on standard
operating conditions. The values can vary considerably
according to:
different amounts of dishes
temperature of mains water supply
pressure of mains water supply
ambient temperature
fluctuations in mains voltage
machine-related factors (e.g. temperature, water
volume, ...).
Switching on the appliance
Close the door.
Turn on the tap fully.
Rotate programme selector
programme.
Switch on the main switch
The programme sequence display
programme sequence starts automatically.
End of programme
The programme ends when the Programme progress
indicator
has gone out and the End-of-programme
5
indicator
illuminates. When the programme ends,
6
the "Top basket washing" function is de-activated if
required (only some models).
Several minutes after the programme has ended:
Open the appliance door.
Wait until the dishes have cooled down and then
remove.
When the programme has ended, you can either switch
off the appliance or restart it with the same or another
programme.
Switching off the appliance
Several minutes after the end of the programme:
Switch off the main switch
"End of programme" display
Turn off the tap
(does not apply to Aqua Stop).
It is not necessary to adjust the programme selector.
Remove the utensils when they have cooled down.
At the end of the programme please open the door fully
and not partially when emptying the dishwasher. Any
escaping water vapour could damage sensitive
worktops.
10
to the required
3
.
1
lights up, the
5
.
1
goes out.
6
Interrupting the programme
Set the main switch
1
Indicator lights extinguish.
If the hot water was switched ON or the appliance has
already heated up and then the appliance door opened,
leave the door ajar for several minutes and then close.
Otherwise, the appliance door may fly open due to
expansion.
In order to resume the programme, set the main
switch to ON again.
Terminating the programme (Reset)
Only when the main switch is on:
Rotate programme selector to the Reset position.
The programme sequence lasts approx. 1 min.
When the programme has run, switch off the main
switch
.
1
To restart, rotate the programme selector
required programme. Switch on the main switch
The programme sequence starts automatically.
Changing the programme
It is possible to change the programme within 2 minutes after
you have switched the dishwasher on.
Should it be necessary to change the programme after this
period, the programme cycle that has already been begun
(e.g. washing) will be completed first of all.
Note
If the power supply is disconnected while the appliance
is operating, e.g. by switching off the appliance or due
to a power failure, all settings remain stored. Operation
continues automatically as soon as the power supply is
restored.
to OFF.
to the
3
.
1