Great Little Trading Alba Regular L4468 Manuale - Pagina 5
Sfoglia online o scarica il pdf Manuale per Arredamento per interni Great Little Trading Alba Regular L4468. Great Little Trading Alba Regular L4468 10. Double drawer unit
Stampa la pagina
STEP 2:
Prepare the central divider. Runners need to be added to BOTH SIDES of
panel E (there are not 2 panels).
Lay panel E in Position 1.
Attach 1x flat runner (#6) to panel E using 3x flat head screws (#5).
Then turn the panel over into Position 2 and attach the remaining flat runner
(#6) using 3x flat head screws (#5).
The position of the runners is important.
- The wheel of the runner needs to be at the front of the panels (with the slot) and close to the
base edge of the panel.
- Use the smaller holes when attaching the runner. Use drill hole guidence for each position as
shown.
- The screws must be fully inserted and lie flat on the runner to ensure the runner works
smoothly.
When fixed in the correct position, there will be a gap between the front edge
of the panel and the start of the runner. If the front of the runner is level with
the edge of the panel, it is in the wrong position.
POSITION 1
#5
#5
E
#6
#5
Hardware for Step 2:
6x #5 Flat Head Screw
2x #6
Flat Runner
POSITION 2
#5
E
#5
#5
#6
E
STEP 3:
Slot panels E & F together as shown.
Note the positioning of panel F - the large drill holes should be facing the
runners.
5
F
BASE