Great Little Trading Hamilton L5131 Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Arredamento per interni Great Little Trading Hamilton L5131. Great Little Trading Hamilton L5131 10.

STEP 5: Attach the legs

Position the assembled panels so they are resting on the back panel B as shown.

Insert 2x barrel nuts (#3) into back panel B, next to the edge you are attaching the first

set of legs to. Ensure the hole of the nut is facing the edge.

Now insert 1x wooden dowel (#4) into the edge of panel B between the 2 barrel nuts.

Insert 2x wooden dowels (#4) into the inner holes on the edge of panel A.

Now bring leg side panel D to connect with panels A&B as shown.

When connected, insert 2x long bolts (#2) through leg side panel D and into the barrel

nuts of panel B. Tighten fully.

Insert 2x cam locks into the larger drill holes on panel A and turn clockwise to lock.

Insert 2x wooden dowels (#4) into the 2 outer holes of the lower leg connection and

position leg cross bar panel F onto the dowels. Note: Ensure the holes on one face of panel

F are facing the floor.

Hardware for Step 5:

2x #2 Bolts (67mm)

2x #3 Barrel Nuts

5x #4 Wooden Dowels

2x #5 Cam Locks

STEP 6:

Repeat step 5 using the 2nd leg side panel E.

Ensure that bolt hardware #2 is fully tightened on

both sides before moving to the next step.

We will return to fix cross bar panel F in place at a

later step.

Hardware for Step 6:

2x #2 Bolts (67mm)

2x #3 Barrel Nuts

5x #4 Wooden Dowels

2x #5 Cam Locks