Great Little Trading Paddington Midsleeper Manuale di istruzioni per il montaggio - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Arredamento per interni Great Little Trading Paddington Midsleeper. Great Little Trading Paddington Midsleeper 10.
Anche per Great Little Trading Paddington Midsleeper: Manuale (10 pagine)
Stampa la pagina
STEP 5:
Take the 2x front guard rails (I), 1x rear guard rail (H) and 2x side rails (G) and insert
20x LONGER 40mm wooden dowels (#2) as shown.
Lightly tap the dowels with a hammer for this step.
#2
I
#2
H
#2
#2
#2
#2
#2
#2
#2
#2
I
#2
#2
#2
#2
#2
G
G
Hardware for Step 5:
20x #2 Wooden Dowels 40mmL
IMPORTANT:
Two people are required from this point forward.
#5
#2
#5
#2
#2
#2
#2
STEP 6:
Attach back side rail & guard rail.
Decide which side is to be the back of the bed and work
on that side.
Take 1x side rail (G) and orientate with the wooden slat
support rail closest to the lower edge. With one person
supporting the side rail, connect with the bed end at the
lower position as shown using the dowels. Insert 1x barrel
nut (#6) into the large hole on the side rail, then insert 1x
LONGER 80mm connecting bolt (#5) from the outside leg
and tighten with your fingers.
Repeat with the other end of the side rail attaching it to
the 2nd bed end.
Then repeat these steps with back guard rail H.
Leave all bolts finger tight at this stage to allow the
next step to be completed.
7
H
G
#6
#6
G
#5
#5
#6
#6
Hardware for Step 6:
4x #5 Connecting Bolts 80mmL
4x #6 Barrel Nuts