Gaggenau AH 530-720 Manuale - Pagina 16
Sfoglia online o scarica il pdf Manuale per Cappa di ventilazione Gaggenau AH 530-720. Gaggenau AH 530-720 18. Gaggenau ventilation hood preface ah 530-790, ah 530-720
Anche per Gaggenau AH 530-720: Manuale di istruzioni per l'uso e il montaggio (18 pagine), Manuale di istruzioni per l'uso e il montaggio (18 pagine)
15 (
/
")
19
32
300
(11
13
/
")
16
310
(12
/
")
3
16
230
(9
/
")
1
16
(3")
76,5
270
396
(15
/
")
(10
/
")
9
5
16
8
62
(2
7
/
")
16
782/1082
(35
/
" - 47
/
")
3
3
8
16
min. 600 (24") electric
min. 700
(27
1
/
")
gas
2
Fig. 19
Fig. 20
16
All manuals and user guides at all-guides.com
Important: Before marking the securing holes,
make sure that no electricity or water lines or
other lines are laid at the drilling points in the wall.
Proceed as follows:
– From the bottom edge of the hood, mark a center
line on the wall.
– With the aid of the drilling template, mark the
positions of the screws on the wall (Fig. 19).
– Pay attention to the minimum clearance of 24 ´ ´ /
600 mm for electric cookers and 27
for gas cookers. The bottom edge of the template
corresponds to the bottom from edge of the hood.
– Using the drilling template, drill the 6 holes for
the hood (area I of the drilling template) and the
two holes for suspending the chimney (area II of
the drilling template). In the top two securing
holes for the hood, fix the two hooks d with the
countersunk screws c. Make sure that the hooks
lie flatly on the wall. In certain circumstances you
may have to countersink the drill holes. Fit the
included dowels a in the other drill holes.
Note: Pay attention to any special accessories that
you may have to fit.
– Screw on the retaining bracket for the chimney
paneling.
– Detach the grease filters.
– Hang the hood on the two hooks. Adjust the
suspended element with the recessed head
screw and align the hood using a spirit level
(Fig. 20).
1
/
´ ´ / 700 mm
2