Gaggenau AH 600 Manuale di istruzioni per l'uso e il montaggio - Pagina 19
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso e il montaggio per Cappa di ventilazione Gaggenau AH 600. Gaggenau AH 600 20. Extractor hood
Stampa la pagina
15 (
/
")
19
32
(11
(12
(9
448
(17
/
")
5
8
(5
/
")
13
137
32
625
(24
/
5
8
mind. 600 Elektro
min. 600 ( 2 4 " ) electric
min. 670 ( 2 6
1
/
" ) gas
mind. 670 Gas
2
Fig. 23
Fig. 24
18
300
/
")
13
16
310
/
")
3
16
230
1
/
")
16
270
(10
/
")
5
8
")
Recirculation air operation
– From the bottom edge of the hood, mark a center
line on the wall.
– With the aid of the drilling template, mark the
positions of the screws on the wall. Mark the
contour of the hook-in area. This will make it
easier to hook in the hood (Fig. 23).
– Pay attention to the minimum clearance of 600 mm /
24" for electric cookers and 670 mm / 26
gas cookers. The bottom edge of the template
corresponds to the bottom from edge of the hood.
– Using the drilling template, drill the 6 holes for the
hood (area I of the drilling template) and the two
holes for suspending the chimney (area II of the
drilling template). In the top two securing holes for
the hood, fix the two hooks e with the countersunk
screws d. Make sure that the hooks lie flatly on the
wall. In certain circumstances you may have to
countersink the drill holes. Fit the included dowels
a in the other drill holes.
Note: Pay attention to any special accessories that
you may have to fit.
– Detach the grease filters.
– Unscrew the two black plates on the left and right
of the chimney.
– Hang the hood on the two hooks. Adjust the
suspended element with the recessed head screw
and align the hood using a spirit level (Figure 19).
– Secure the hood to the wall using the 4 screws b
with shims c.
– Screw the retaining bracket for the chimney
paneling onto the wall together with the two
retaining brackets for the housing (air guidance)
(Fig. 24).
1
/
" for
2