Gaggenau AW 201 Manuale di istruzioni per l'uso e il montaggio - Pagina 17
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso e il montaggio per Cappa di ventilazione Gaggenau AW 201. Gaggenau AW 201 20. Extractor hood
Anche per Gaggenau AW 201: Manuale di istruzioni per l'uso e il montaggio (13 pagine)
15
300
310
230
76,5
270
405
103
160
min. 600 electric
mind. 600 Elektro
min. 650 gas
mind. 650 Gas
Fig. 19
Fig. 20
Important: before marking the securing holes,
make sure that no electricity or water lines or
other lines are laid at the drilling points in the wall.
Proceed as follows:
– From the bottom edge of the hood, mark a center
line on the wall.
– With the aid of the drilling template, mark the
positions of the screws on the wall (Fig. 19).
– Pay attention to the minimum clearance of 600 mm
for electric cookers and 650 mm for gas cookers.
The bottom edge of the template corresponds to
the bottom from edge of the hood.
– Using the drilling template, drill the 6 holes for
the hood (area I of the drilling template) and the
two holes for suspending the chimney (area II of
the drilling template). In the top two securing
holes for the hood, fix the two hooks d with the
countersunk screws c. Make sure that the hooks
lie flatly on the wall. In certain circumstances you
may have to countersink the drill holes. Fit the
included dowels a in the other drill holes.
Note: pay attention to any special accessories that
you may have to fit.
– Screw on the retaining bracket for the chimney
paneling.
– Detach the grease filters.
– Hang the hood on the two hooks. Adjust the
suspended element with the recessed head
screw and align the hood using a spirit level
(Fig. 20).
15