Gaggenau AW 442 120 CN Manuale di istruzioni - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per Cappa di ventilazione Gaggenau AW 442 120 CN. Gaggenau AW 442 120 CN 12.
Stampa la pagina
Area
Cleaning agents
Glass
Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Operating controls
Hot soapy water:
Clean using a damp dish cloth and dry
with a soft cloth.
Risk of damage to the electronics from
penetrating moisture. Never clean oper-
ator controls with a wet cloth.
Do not use any stainless steel cleaners.
Degreaser (product no. 00311297)
Intensive degreaser for effectively removing grease
deposits in the extractor hood. Ideal for pre-treating
metal grease filters.
Stainless steel care cloths (product no. 00311134)
Used to care for stainless steel surfaces. Impregnated
with special oil to prevent the accumulation of dirt and
fingerprints.
Removing metal grease filter
m
Risk of injury!
The metal grease filters and components inside the
appliance may have sharp edges. Wear protective
gloves.
m
Risk of injury!
The metal grease filters are very heavy. Remove the
metal grease filters carefully and secure them against
falling down when doing so.
The metal grease filter consists of three components.
You can take the metal grease filters apart to facilitate
cleaning.
1
Open the lock and fold the metal grease filter
downwards. For safety reasons, the metal grease
filter is locked in place at the rear edge.
2
Slightly lift the front edge of the metal grease filter
until it can be removed from the holder.
Note: Grease may accumulate in the bottom of the
metal grease filter. Hold the metal grease filter level
to prevent fat from dripping out.
8
3
Remove the metal mesh filter.
4
Pull the two parts of the filter apart, using the
recessed grip to help you do this.
5
Clean the metal grease filter.
6
Clean the appliance from the inside.