Gaggenau AW 541-120 Manuale di istruzioni per l'uso e il montaggio - Pagina 17
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso e il montaggio per Cappa di ventilazione Gaggenau AW 541-120. Gaggenau AW 541-120 20.
Stampa la pagina
15
300
310
230
76,5
270
396
62
782/1082
min. 600 electric
mind. 600 Elektro
min. 700 gas
mind. 700 Gas
Fig. 19
Fig. 20
Important: before marking the securing holes,
make sure that no electricity or water lines or
other lines are laid at the drilling points in the wall.
Proceed as follows:
–
From the bottom edge of the hood, mark a center
line on the wall.
– With the aid of the drilling template, mark the
positions of the screws on the wall (Fig. 19).
– Pay attention to the minimum clearance of 600 mm
for electric cookers and 700 mm for gas cookers.
The bottom edge of the template corresponds to
the bottom from edge of the hood.
– Using the drilling template, drill the 6 holes for
the hood (area I of the drilling template) and the
two holes for suspending the chimney (area II of
the drilling template). In the top two securing
holes for the hood, fix the two hooks
countersunk screws
lie flatly on the wall. In certain circumstances you
may have to countersink the drill holes. Fit the
included dowels
a in the other drill holes.
Note: pay attention to any special accessories that
you may have to fit.
– Screw on the retaining bracket for the chimney
paneling.
– Detach the grease filters.
– Hang the hood on the two hooks. Adjust the
suspended element with the recessed head
screw and align the hood using a spirit level
(Fig. 20).
d with the
c. Make sure that the hooks
15