70mai M500 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Telecamere da cruscotto 70mai M500. 70mai M500 5. 70mai dash cam
Anche per 70mai M500: Manuale d'uso (11 pagine)

Stampa la pagina

3. Connecting the power cord

Connect the power cord to the Type-C power port

sure that it is well connected.

4. Pasting the bracket

Rotate the mount of the bracket and make the heat resistant adhesive face toward the front

windshield.

Peel off the protective film from the heat resistant adhesive, and paste the bracket on the

electrostatic sticker in the dotted area.

Press the mount to make sure it is firmly attached on the electrostatic sticker.

5. Connecting the power supply

As shown in the figure, run the power cord along the top of the windshield, down the A-pillar, and

around the glove compartment, so that the power connector is near the cigarette lighter. Connect

the power cord to the car charger, then plug the charger into the cigarette lighter socket.

Notes:

●

Use the included crowbar to hide the power cord underneath the vehicle's headliner and rubber seal

along the A-pillar.

●

Depending on the vehicle, the cigarette lighter socket may be located in a different position. The figure

provided is for reference only.

Adjusting the dash cam angle

Connect the dash cam with the 70mai app following the instructions on the user guide.

Turn on the dash cam and adjust the camera angle based on the preview screen on the app.

Type-C power port of the dasm cam. Pull the power cord to make