DAYCO D165DC Manuale dell'operatore - Pagina 12

Sfoglia online o scarica il pdf Manuale dell'operatore per Utensile a crimpare DAYCO D165DC. DAYCO D165DC 19.

KWIKRIMP® CONCEPT

THE KWIKRIMP® CONCEPT IS AN ENGINEERED PROGRAM, DESIGNED TO

INCORPORATE DAYCO HOSE, FITTINGS AND CRIMPERS INTO ONE EFFECTIVE AND

RELIABLE HOSE ASSEMBLY SYSTEM.

The Kwikrimp® Concept is an affirmation to all Dayco Distributors, OEMs and users of the

Kwikrimp® system that Dayco will support only those who use Dayco hose and couplings in the

Kwikrimp® assembly system. However, the Kwikrimp® Concept is also a statement that serves to

warn that Dayco will not be responsible when interchanging a Dayco hose and/or couplings with

hose and/or couplings of any other manufacturer. Dayco products are part of an engineered

system, which must be assembled and used in accordance with Dayco instructions and limitations.

Dayco hose, couplings and crimping machines are designed into an effective and reliable assembly

system and the use of other than Dayco products may produce hose assemblies that will not meet

rated performance. Failure to follow Dayco instructions and limitations could lead to premature

hose failures resulting in property damage, serious injury or death.

Dayco's limited warranty shall apply only if the customer uses hose, fittings, hose fitting

components and crimp equipment specifically engineered, designed and produced to Dayco

process specifications.

DAYCO DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR ANY CRIMPED HOSE

ASSEMBLIES NOT PRODUCED FROM GENUINE DAYCO HOSE FITTINGS, HOSE AND

EQUIPMENT, IN CONFORMANCE WITH DAYCO PROCESS SPECIFICATIONS FOR EACH

SPECIFIC HOSE ASSEMBLY.

The argument that hoses branded with identical SAE numbers are the same and can be

interchanged with Dayco couplings is not true! Hose with identical brand can be expected to

perform only to the requirements of SAE when assembled with compatible couplings. SAE

recognizes this fact as shown by the following statement taken from the 1998 SAE Handbook,

J1273, Volume 2, and page 22.198.

3.10 Proper End Fitting – Care must be taken to insure proper compatibility exists between

the hose and coupling selected based on the manufacturer's recommendations substantiated by

testing to industry standards such as SAE J517.

All Dayco distributors, OEMs and Kwikrimp® users must recognize that the following points are

critical when considering any and all aspects of the Kwikrimp® program.

The data supplied with each Crimper was developed after extensive impulse testing with

Dayco hose and couplings. All Dayco hose styles are tested with the proper Kwikrimp® couplings

before they are added to the Dayco Approved List. Dayco is constantly checking and upgrading

hose quality.

Dayco Kwikrimp® data does not apply to all hose and couplings, only those products

bearing the Dayco identification with the proper Dayco catalog number.

Dayco couplings used with other than Dayco branded hose will not necessarily produce a good

assembly. Identical hose styles, made by different suppliers, are not the same when it comes to

performance with Dayco couplings.

Page