Dynabrade 65016 Manuale di sicurezza, funzionamento e manutenzione - Pagina 9

Sfoglia online o scarica il pdf Manuale di sicurezza, funzionamento e manutenzione per Smerigliatrice Dynabrade 65016. Dynabrade 65016 16. Electric tool post grinder 2 inch x 36 inch abrasive belt machine

Stampa la pagina

MACHINE OPERATION

Belt Installation /Change
Step 1
Remove Belt Guard by grasping Door Latch (97760)
and rotate quarter turn counter-clockwise.
Step 2
Pull the belt release lever rearward until distinctive
"click" or catch is felt indicating the engagement of
cam mechanism into machined groove.
Step 3
Important: With firm rearward hold on release lever
handle, remove belt with left hand.
Step 4
Install new belt in same manner.
Step 5
With hand and fingers free from moving parts, push
release lever forward until belt becomes taught.
Replace belt guard and turn door latch quarter turn clockwise until "click" is heard.
Belt Tracking
Belt tracking is accomplished by turning the Tracking Knob (95314). Turning clockwise moves belt to the right.
Turning counter-clockwise moves belt to the left.
Coolant Nozzle
The coolant nozzle can be extended or retracted (if dia. allows) for good placement of coolant flow by loosening
Hex Screw (95179). Retighten once placement is achieved. The coolant nozzle has an adjustable flow valve
which connects to 1/4" diameter flexible nylon tubing.
Drip Pan
The drip pan is hinged on a #10 eye screw and can be tilted fore and aft to direct coolant toward lathe bed or
to a drain hose. A 1/4 NPT port is provided at each end for this purpose.
Catch Tray Assembly
Each machine comes equipped with an adjustable catch tray which positions underneath the contact wheel.
Its purpose is to collect the major portion of grind dust/swarf and direct it away from the lathe ways. It should
be placed within 1/8" of workpiece. Position can be changed by loosening Knob (97773). When grinding into
a shoulder, it will be necessary to remove tray entirely.

MAINTENANCE

The grinders described in this manual have been designed to be maintenance-free. All bearings and moving
parts are sealed and lubricated for life. Electric motor maintenance should be performed as recommended by
the motor manufacturer.
Good housekeeping is essential to insuring long life of any machine tool. By keeping the machine clean and
visually inspected for any wear, the machine will provide many years of quality service.
Periodically inspect the contact wheels, idler rolls and drive pulley for any signs of wear. Repairing or replacing
worn parts early enough will prevent other parts from becoming damaged.
9