75F HYPERSTAT DKN509 Manuale di installazione - Pagina 2
Sfoglia online o scarica il pdf Manuale di installazione per Smorzatori d'incendio e di fumo 75F HYPERSTAT DKN509. 75F HYPERSTAT DKN509 11.
|
PRECAUTIONS
• Do not fail to wire devices with the correct polarity, when using a shared transformer may result
in damage to any device powered.
• Turn off the power before wiring.
• Never connect or disconnect the wiring with the power turned on.
• Do NOT allow live wires to touch the circuit boards.
• Install in accordance with all state and local codes.
• Do not assemble the front plate of the HyperStat to the back plate, when the power is ON.
|
FEATURES
• Control of up to 3 stages of heating/cooling or fan or modulating capacity equipment.
• Built in sequences for occupancy detection.
• Over the air firmware updates.
• Mounting on existing gang boxes in horizontal or vertical orientation
• Has inbuilt sensors to monitor temperature, relative humidity, Ambient light, Occupancy, CO2,
VOC and PM2.5(optional)
• Has up to 6 Relays for HVAC control and 3 Analog outputs for actuator control/dimming
• The Hyper Stat can power from 24V AC/ DC supply.
• Consumes less than 2W of power
+1 888 612 7575 (USA) or 1800 121 4575 (INDIA)
support75F.io|