Dynabrade RaptorVac 61204 Istruzioni per la sicurezza, il funzionamento e la manutenzione - Pagina 3
Sfoglia online o scarica il pdf Istruzioni per la sicurezza, il funzionamento e la manutenzione per Aspirapolvere Dynabrade RaptorVac 61204. Dynabrade RaptorVac 61204 9. Pneumatic drum vacuum
Stampa la pagina•
Store idle equipment out of the reach of children and do not allow persons unfamiliar with the equipment or these instructions to operate the equipment.
•
Use the equipment, accessories, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
•
Regularly clean the equipment's air vents, as excessive accumulation of dust may cause premature failure.
•
Do not operate equipment with vacuum head removed from DrumVac assembly.
•
Do not operate equipment in explosive environments, such as in the presence of flammable liquids, gases, or dust 1/32"(.8mm) Combustible dust based on NFPA
standards. This equipment could create sparks which ignite the dust or fumes.
•
Do not use the equipment as a means of transportation.
•
Do not transport or use equipment on uneven or inclined surfaces.
•
Stay alert, watch what you are doing and use common sense when operating equipment. Do not use equipment while you are tired or under the influence
of drugs, alcohol or medication.
•
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injury.
•
Do not use the airline for anything other than what it is intended for. Never use the airline for carrying, pulling or unplugging the equipment. Keep airline away
from heat, oil, sharp edges or moving parts.
•
Do not use the DrumVac kit unless fully assembled as intended with drum. Ensure all vacuum connections have been made before turning unit to on position.
•
Ensure DbA level while using DrumVac does not superceed acceptable levels per operators shift, based on governing body guidelines.
•
The vacuum system will operate by an on/auto/manual switch located on the front of the Motorhead/Vacuum Head Assembly. This switch must be turned on to
activate the Motorhead.
•
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
•
Avoid providing maintinance in areas where combustible dust accumulation is greater than 1/32"(.8mm). Combustible dust based on NFPA standards.
This equipment could create sparks which ignite the dust or fumes.
•
Use the proper equipment to handle and dump the 55 (208 Liters) Gallon drum when full of collected debris. Keep all surrounding areas free of additional
operators when transport and dumping of drum takes place.
•
Use only genuine Dynabrade replacement parts to ensure quality.
To order replacement parts, specify Model # and Serial # of your equipment.
•
Have your equipment serviced by a qualified repair person using only identical replacement parts.
•
Unplug vacuums main air supply before providing maintenance.
•
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source.
•
Do not overreach. Keep proper footing and balance at all times. This enables better control of the equipment in unexpected situations.
•
Do not let familiarity gained from frequent use of equipment allow you to become complacent and ignore tool safety principles.
A careless action can cause severe injury within a fraction of a second.
OPERATION
WARNING
CAUTION
MAINTENANCE INSTRUCTIONS
WARNING
CAUTION
EQUIPMENT USE AND CARE
3