ADEMCO Counterforce CFV15PCN Manuale di programmazione - Pagina 7
Sfoglia online o scarica il pdf Manuale di programmazione per Sistema di sicurezza ADEMCO Counterforce CFV15PCN. ADEMCO Counterforce CFV15PCN 16.
Stampa la pagina
CONFIGURABLE ZONE TYPE OPTIONS (*182-*185)
∗
182 CONFIGURABLE ZONE TYPE 90
∗
183 ZONE TYPE 90 REPORT CODES
IMPORTANT: Use existing Contact ID®
codes, if appropriate, or define unique codes
in CID code range 750-789. See important
note in installation instructions.
∗
184 CONFIGURABLE ZONE TYPE 91
∗
185 ZONE TYPE 91 REPORT CODES
IMPORTANT: Use existing Contact ID®
codes, if appropriate, or define unique codes
in CID code range 750-789. See important
note in installation instructions.
TOUCH SCREEN DEVICE ENABLE
∗
189 AUI DEVICE 1 and 2 ENABLE
(for Touch Screen Style Keypads)
KEYPAD OPTIONS *190-*196 (NOTE: Options for keypad address 16 are set by the factory and cannot be changed.)
NOTE: Each keypad must be assigned a unique address. Keypads programmed with the same address will give
unpredictable results.
∗
190 KEYPAD 2 DEVICE ADDRESS 17
∗
191 KEYPAD 3 DEVICE ADDRESS 18
∗
192 KEYPAD 4 DEVICE ADDRESS 19
∗
193 KEYPAD 5 DEVICE ADDRESS 20
∗
194 KEYPAD 6 DEVICE ADDRESS 21
∗
195 KEYPAD 7 DEVICE ADDRESS 22
∗
196 KEYPAD 8 DEVICE ADDRESS 23
∗
197 EXIT TIME DISPLAY INTERVAL
∗
199 ECP FAIL DISPLAY
1
2
3
4
Enter the appropriate value for each entry, 1-10, based on the charts provided on the
next page. Each entry is the sum of the values of its selected options
(0-9, #+10=10, #+11=11, #+12=12, #+13=13, #+14=14, #+15=15).
UL: Do not configure zones as a fire alarm or UL burglar alarm zone.
90 ALARM ID: XXX
TROUBLE ID: XXX
1
2
3
4
Enter the appropriate value for each entry, 1-10, based on the charts provided on the
next page. Each entry is the sum of the values of its selected options
(0-9, #+10=10, #+11=11, #+12=12, #+13=13, #+14=14, #+15=15).
UL: Do not configure zones as a fire alarm or UL burglar alarm zone.
91 ALARM ID: XXX
TROUBLE ID: XXX
System supports up to two touch screen style keypads (e.g.,
[1] [1]
Symphony Advanced User Interface, and 6270 Touch Screen
Keypad).
AUI 1 AUI 2
Touch Screen (AUI) device 1: Must set AUI device address to 1
Touch Screen (AUI) device 2: Must set AUI device address to 2
Enter each touch screen keypad's home partition.
[0] [0]
Enable
Sound
Enable
Sound
[0] [0]
[0] [0]
[0] [0]
[0] [0]
[0] [0]
[0] [0]
[0]
[0]
– 7 –
5
6
7
8
Enter the desired 3-digit Contact ID® report codes for
alarms and troubles occurring on zones assigned to this
zone type. Enter the codes sequentially (all 6 digits).
When entering digits, [#] moves cursor back, [∗] moves
forward. Press [∗] when done to continue.
5
6
7
8
Enter the desired 3-digit Contact ID® report codes for
alarms and troubles occurring on zones assigned to this
zone type. Enter the codes sequentially (all 6 digits).
When entering digits, [#] moves cursor back, [∗] moves
forward. Press [∗] when done to continue.
0 = disabled
1 = partition 1
2 = partition 2
3 = partition 3 (common)
NOTE: Use of touch screen style kepads does not affect the
number of standard keypads supported.
Enable:
0 = disable; 1 = enable
Sound:
0 = no suppression
1 = suppress arm/disarm and E/E beeps
2 = Suppress chime beeps only
3 = suppress arm/disarm, E/E, and chime
beeps
See field ∗190 for entries.
See field ∗190 for entries.
See field ∗190 for entries.
See field ∗190 for entries.
See field ∗190 for entries.
See field ∗190 for entries.
0 = no display; 1-5 = seconds between display refresh
NOTE: If enabled and using only 2-digit fixed-word
keypads (e.g., 6150RF), do not set exit delay time
greater than 96 seconds. See Inst. Instr. for explanation.
0 = 3-digit display ("1" + device address)
1 = 2-digit fixed-display as "91"
9
10
9
10