CEL POWERminidriver Manuale d'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale d'uso per Utensile elettrico CEL POWERminidriver. CEL POWERminidriver 16. Lithium ion screwdriver
Stampa la paginaFAQ
Do I need to fully discharge the battery
before recharging it?
No the Li-Ion system has no memory
effect so you can charge it at any time.
The charge will be retained in storage for
much longer than older
When I pull the trigger the motor
doesn't run, why?
a) Check the 3 way direction switch, if it is
in the middle only the LED will light.
b) The Lithium Ion battery has a protection
circuit to prevent it from completely
discharging. The battery will provide
constant power then stop rather than
slowing down. Recharge fully.
Why does my driver stop sometimes?
See above.
Where should I keep my POWERmini
driver?
In a dry place at a stable temperature
between 10ºC and 24ºC (50ºF and 75ºF).
The kitchen drawer for example.
The driver can't screw the fastening all
the way in, what can I do?
Try using the spindle lock feature, just
release the trigger and twist the entire unit
in the required direction.
For big jobs try
www.power8workshop.com
battery
technology.
I keep stripping screw heads and
damaging the driver bits, what can I
do?
Make sure you use the correct driver bit
for the brand of fastening you have,
Phillips head screws are different to cross
head screws. Use the 8 bladed bits for
Phillips screws. Press hard even when
removing screws.
What should I do if my POWERmini
driver gets wet?
Dry fully for several days in a warm but not
hot place before trying to charge or use
How can I get my POWERmini driver
repaired if it is damaged?
Contact your retailer.
Where do I find my serial number?
On the right hand side of the upper
section.
Where can I get replacement parts,
advice or help?
Ask at your retailer or visit
www.cel-POWERmini.com
What is your returns policy?
See inside cover of manual.
12.0
.