HiB 78749000 Manuale

Sfoglia online o scarica il pdf Manuale per Prodotti per la cura della persona HiB 78749000. HiB 78749000 2.
Anche per HiB 78749000: Manuale (2 pagine), Manuale di avvio rapido (2 pagine)

Stampa la pagina

This product is IP44 rated and is suitable for installation in

zones:

Outside Zone

All installations must comply with guidelines which are based on a zonal

concept. The diagram above illustrates this concept and must be followed

to ensure the safe installation of electrical appliances in the bathroom. These

regulations apply to domestic installations only.

electrical bathroom products must be installed in accordance with

current building and wiring regulations. If in doubt please contact

an electrician.

Installation

1. Position the mirror in a suitable location (according to the zonal

diagram - Fig. 1), ensuring that the domestic electrical mains

supply is within reach of the electrical entry point of the product.

2. Carefully mark the position of the mirror using a soft pencil

ensuring it is level. Remove the mirror and mark the mounting

points. Please ensure that all marked mounting points

accurately match up with the fixing points on the mirror.

3. Using a suitable drill bit, drill holes in the marked positions to a

suitable depth. If drilling through tile, use a ceramic drill bit.

4. Insert wall plugs level with the surface of the wall. If fitting to a tiled

surface, wall plugs should be inserted below the tile surface to

avoid cracking. NB. For plasterboard walls, specialist fixings should

be purchased, available from any DIY or hardware store.

5. Screw supplied fixings into wall plugs.

6. Ensure the domestic electrical mains supply to which the

mirror is being connected is turned off. Connect the domestic

mains supply to the terminal box according to the wiring diagram

(Fig. B) overleaf.

7. Hang the mirror in position.

8. Switch the domestic electrical mains supply for the mirror back on.

NB. LED Mirrors with charging socket only; On first use of the charging

socket, there may be resistance when inserting the plug. Make sure

that the mirror is held firmly so that it is not pushed off the wall. After a

few uses, resistance will ease and the socket will function as normal.

WEEE compliance

Must not be mixed with general household waste

+44 (0)20 8441 0352

+44 (0)20 8441 0219

Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN

©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the

interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.

(Fig. 1)

HiB recommends that all

[email protected]

Illuminated Mirrors

Name

Art No.

Name

Alpine 50

78753000

Globe 50

Alpine 60

78754000

Globe 60

Alpine 80

78755000

Globe 90

Alpine 100

78756000

Globe 120

Arena 80

79530800

Globe 140

Arena 120

79531200

Vega 40

Duplus 50

78727000

Vega 50

Duplus 60

78728000

Vega 60

Duplus 80

78729000

Vega 80

Globe 45

78400000

Vega 120

Thank you for purchasing this HiB product.

Please read through these instructions carefully and refer back to

them during installation to ensure that your product is fitted safely and

that it retains its high quality finish.

Please retain this leaflet for future reference.

Before installation, ensure the domestic electrical mains supply

to which the mirror is to be connected is turned off. Before

drilling, ensure that there are no hidden cables or pipes in the

wall.

Mounting Points Diagram (Fig. A)

REAR VIEW

mounting points

Note: Globe / Arena are dual orientation. Alpine,Duplus and Vega are

fixed orientation.

Operation Instructions

Alpine/ Arena / Vega - To turn illumination on or off, press the touch

sensor. To cycle through warm to cool colour temperature, press and

hold the touch sensor - release when the desired colour temperature

has been reached. Heated Pad is only on when mirror is illuminated.

Globe / Duplus - To turn illumination on or off, wave hand past

the sensor on the side/bottom of the mirror. To alter the colour

temperature, hold your hand over the sensor, remove hand when the

desired colour temperature has been reached. Heated Pad is only on

when mirror is illuminated.

NB. Globe / Duplus mirrors must be installed with a minimum distance

of 150mm between the infra-red sensor switch and any adjacent wall or

object to ensure correct operation of the sensor.

hib.co.uk

FI#01 017 R191121

Art No.

78500000

78600000

78640000

78700000

78710000

78749000

78750000

78751000

78752000

78748000

Hanging landscape

Ver No.

3.0 Jan 2020