GREAT PLANES Micro Whizz Manuale di istruzioni - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per Giocattolo GREAT PLANES Micro Whizz. GREAT PLANES Micro Whizz 16.

2. Gather the four pushrods, threaded couplers, clevises,

and clevis retainers as shown in the above photograph.

3. Prepare the pushrods for assembly by sanding or filing

one end of each pushrod. Use silver solder to attach the

threaded couplers to the end you have sanded on each of

the four pushrods. Follow the instructions with the silver

solder carefully.

4. Place a clevis and clevis retainer on each of the pushrods

as shown.

5. Insert the rudder and elevator pushrods into the slot in

the tail boom. Snap the clevis onto the elevator and rudder

control horns as shown in the photograph above.

6. Position the rudder so that it is directly aligned with the

fin. As indicated in the photograph above, place a bend in

the pushrod in the location shown. Again, make sure that

the fin is in exact alignment and make a "Z" bend in the

pushrod where the pushrod meets the holes in the centered

servo arm. Repeat this process for the elevator pushrod.

7. Use the same procedure to connect the aileron pushrods.

Your completed assembly should look the same as shown in

the preceding photographs.