GREAT PLANES Mini Slinger Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Giocattolo GREAT PLANES Mini Slinger. GREAT PLANES Mini Slinger 12.

❏

4. With a sharp hobby knife, cut a 3 mm [1/8"] deep slit

on the underside of the wing from this hole to the end of the

wing parallel with the leading edge.

❏

5. Feed the receiver antenna through the hole and

embed it in the slit. Cover the slit with transparent tape.

Finish the Model

❏

1. Use (4) #2 x 5/16" [8 mm] screws to attach the wing tips

to the wing.

❏

2. Press the propeller onto the motor shaft. The two

indentations at the center of the prop should face the model.

❏

3. Use the included hook and loop material to secure the

battery pack, receiver, and ESC to the radio tray. You can

also use optional double-sided servo tape. If using an

auxiliary elevon mixer, place it into the tray at this time and

check control surface operation with your radio. Computer

radio systems equipped with an elevon function will not

require a separate mixer to be installed.