GREAT PLANES P-51 MUSTANG Manuale di istruzioni - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per Giocattolo GREAT PLANES P-51 MUSTANG. GREAT PLANES P-51 MUSTANG 20.

❏ ❏

5. Apply a small spot of foam-safe CA to the bottom of

the control horn and insert it into the cut in the aileron. Press a

nylon backplate on the backside of the control horn as shown.

❏ ❏

6. Install a black nylon snap keeper onto the pushrod

at the control horn.

❏

7. Install the rudder and elevator pushrods in the same

way as the ailerons. Use the 5-3/4" [146 mm] prebent

pushrod for the rudder and the 2-1/2" [64 mm] prebent

pushrod for the elevator.

Install the Motor & Speed Control

❏

1. Connect the output wires of your ESC to the motor.

Check the direction of the motor before permanently

installing it.

❏

2. Install the ESC as shown using a small section of hook

and loop tape. Place the hard "hook" side in the provided

cutout in the fuselage and the softer "loop" side on the back

of the ESC. If your ESC has a BEC switch, install it in the

provided cutout. For some electronic speed controls, it may

be necessary to trim the foam slightly to allow for wire

clearance and switch mounting.

❏

3. Slide the gearbox onto the square wood stick in the

nose. Secure it with the supplied #2 x 3/8" [9.5 mm] screw.