Dynacord PowerMax PM 2600 Opuscolo e specifiche - Pagina 2
Sfoglia online o scarica il pdf Opuscolo e specifiche per Amplificatore Dynacord PowerMax PM 2600. Dynacord PowerMax PM 2600 2. Dynacord stereo amplifier brochure
Anche per Dynacord PowerMax PM 2600: Opuscolo e specifiche (4 pagine), Opuscolo e specifiche (tedesco) (4 pagine)
Stampa la pagina
PM2600
PM2600
Dual Active 2-Way
"PowerMax" Controlled Amplifier
2600 Watts
Basically, the PM2600 can drive any active 2-way system
that consists of full-range cabinets and sub woofers. The
integrated frequency crossover operates in PowerMax
function mode and has been optimised for those com-
binations. Intelligently configuring system components
leads to outstanding results. For more details, please refer
to the PowerMax Systems and PowerMax230 Controller
descriptions.
Crossover Section
Crossover Type
Crossover Frequency
Lo-Cut
*Patent pending
Load Impedance
Maximum Midband Output Power, THD = 1%, 1kHz, 60Hz
Rated Output Power, THD < 0.1%
Maximum Single Channel Output Power,
Dynamic-Headroom, IHF-A
Maximum RMS Voltage Swing, THD = 1%
Frequency Response, -3dB, ref. 1kHz, Lo-Cut
Minimum Load Impedance
Input Sensitivity at rated output power @ 4Ω
Maximum Input Level
THD at rated output power, MBW =80kHz
Crosstalk Attenuation
Slew Rate
Power Bandwith, THD = 1%, ref. 1kHz, half power @ 4Ω
Input Impedance, 20Hz ... 20kHz, balanced
Damping Factor
Signal-to-Noise Ratio, A-weighted
Power Requirements
Power Consumption at 1/8 maximum output power @ 4Ω
Protection
Cooling
Safety Class
Dimensions (W x H x D), mm
Weight
Amplifier at rated conditions, all channels driven, 8Ω loads, HI-Channel rated at 1kHz, LO-Channel rated at 60Hz unless otherwise
specified. Note: 0dBu = 0.775V
32
P
Xa2600
3rd Order BU, Constant-Power-Response
Stereo active 2-way
160 Hz
12dB/octave, 30Hz at -3dB ref. 1kHz
O
W
E
R
PM2600
PowerMax12*, Stereo active 2-way
110 Hz
12dB/octave, 25Hz at -3dB ref. 1kHz
Xa2600, PM2600
HI-Channels
8Ω
4Ω
380W
700W
300W
600W
400W
750W
25Hz ... 45kHz
0dBu (775mV)
+21dBu (8.7V)
10Hz ... 50kHz
230V, 50Hz ... 60Hz
Audio limiter (APC), TBC, High temperature,
DC, HF, Back-EMF, Peak current limiter,
Inrush current limiter, Turn-on delay
Front-to-rear, 4-stage-fans
483 x 177 x 426
A
M
P
L
I
LO-Channels
8Ω
4Ω
380W
700W
350W
700W
400W
750W
58.7V
2.5 Ω
< 0.05%
> 60dB
30V/µs
20kΩ
> 300
> 100dB
1800W
I
30kg
F
I
E
R
S