DaySequerra DownMix Manuale d'uso - Pagina 18

Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale DaySequerra DownMix. DaySequerra DownMix 20. Dts neural surround, 5.1 surround encoder

Stampa la pagina

Firmware Update

Provided that you have completed warranty registration for your DownMix on our website, we will notify

you as new firmware updates become available. The notification will contain the announcement of new

firmware, issues corrected, and instructions on how to retrieve the update files.

Update packages will be available as a single .ZIP file for download. Compatible archive programs

include Winzip (www.winzip.com) or WinRAR (www.rarlabs.com) and may be downloaded from their

respective websites. The update package will contain four files; dsp2533.bin, firmdown.exe, readme.txt

and update.bat.

Firmware updating is accomplished via UDP Port 44600. At this time, updating is only supported by

using a cross-over cable directly connected to one PC. If your PC has multiple network interface

adapters, each additional adapter will need to be disabled before attempting to upgrade your unit. You

may also wish to disable your firewall during the upgrade process. For additional support with

networking, please contact your network administrator.

DO NOT UNPLUG THE UNIT OR TURN OFF YOUR PC WHILE THE FLASH IS IN PROGRESS.

If the flash procedure is interrupted before it can complete, DownMix may be left in an un-usable state

and will need to be returned for factory service.

Please follow these steps to upgrade your unit:

1. Un-Zip the files using a compatible utility that can handle ZIP archive file format into a new

empty directory on your PC.

2. Disable any additional network interface adapters present on your PC. Go to Control Panel,

then Network Connections. Right click on the adapter to be disabled and select Disable.

3. Unplug your PC from the network it is currently connected to.

4. If your PC's network interface is set up for DHCP, disable it and enter a static IP address. While

in Network Connections under Control Panel, right click on the network interface and select

Properties. Select "Internet Protocol (TCP/IP)" and press the Properties button. On the general

tab of the dialogue box, select "Use the following IP address". Enter an IP address in the box "IP

Address" within the local network range. (Example: 192.168.0.1) Click in the "Subnet mask" box

and it should auto populate with 255.255.255.0. Select OK to close the dialog, and then OK to

close the properties box.

5. If DownMix is set up for DHCP, disable it and enter a static IP address within the local network

range. (Example: 192.168.0.2) Details are available in the NETWORK section of this manual.

6. Connect the DownMix to the PC using a crossover Ethernet cable.

7. When Windows has acknowledged the Ethernet connection, you may start the update progress

by double clicking on upgrade.bat. DownMix should download the new firmware and reboot

within 30 seconds.

8. Disconnect the cross-over cable and return your PC and DownMix to their original

configurations.

DownMix User Manual