DaySequerra UpMix Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale DaySequerra UpMix. DaySequerra UpMix 20. 7.1 / 5.1 surround decoder

Network Menu

UpMix has several configurable network settings. All of the UpMix network settings are password

protected. The password to change the network settings is upmix123. Please take note when entering

the password that the UpMix password is case sensitive. UpMix is configured to take a DHCP address

by default.

Device Name: Allows you to change UpMix's name as reported to DNS. Press ENTER while the cursor

is over this field to go into data entry mode. Turn the rotary encoder to scroll through the available

choices of letters (A-Z, 0-9 and _ (underscore)) and press enter to move on to the next field. Turning

the rotary encoder again will start to scroll through the choices for the next letter, or pressing ENTER

accepts the name.

DHCP: Configures UpMix to look for a DHCP server for IP configuration. (Enabled or Disabled)

IP Address: If DHCP is set to disabled, allows you to enter the desired IP address manually. Press

ENTER while the cursor is over this field to go into data entry mode. Scroll through the available

numbers (0-255) and press ENTER to move to the next octet.

MAC Address: Displays UpMix's MAC address if needed for firewalls or DHCP IP address

assignments.

Diagnostics Menu

Current Faults: Displays any error states that UpMix may be in.

DSP Utilization: Shows the current load on UpMix's DSP.

LED Test: Turns on all front-panel LED indicators to verify their functionality.

Meter Brightness: Allows adjustment of UpMix's Input and Output meters.

Display Brightness: Allows adjustment of UpMix's display output.

Restore Settings: Returns all settings to their factory default values and reboots the unit. Network

settings will not be lost.

Reboot Unit: Performs a warm boot. No settings are erased or restored to defaults.

GPIO Output: Allows for testing of the internal signaling circuit within UpMix. The two fields displayed

represent each output, 1 and 2, respectively.

GPIO Input: Shows the current state of the GPIO inputs. The four fields of the displayed status

represent each input, 1-4, respectively.

UpMix User Manual