GREAT PLANES synapse arf Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Giocattolo GREAT PLANES synapse arf. GREAT PLANES synapse arf 12.

BEFORE YOU BEGIN

Before building the model, please follow the assembly and

break-in instructions that can be found in the manual that

accompanies the included ducted fan unit.

❏

1. Begin by gluing the elevon servos into the servo bays

with the servo splines facing forward. Thick foam safe CA

glue or epoxy can be used. Guide the servo wires down the

grooves molded into the ducted fan channel and through the

hole as shown.

❏

2. Use a sharp hobby knife to cut slots for the control

horns 3/8" [9.5mm] from the inside edge of the elevons at

the leading edge just behind the bevel. The slots should be

1/4" [6mm] long and approximately 1/32" [0.8mm] to 3/64"

[1.2mm] wide and be perpendicular to the hinge line.

❏

3. Cut away the front of the control horn base at the tab

of both control horns. Enlarge the outer holes of the elevon

control horns with a 1/16" [1.6mm] drill bit.

❏

4. Install the control horns onto the undersides of the elevons

by ﬁ tting the control horn tabs into the slots you made. Secure

the control horns to the elevons with a couple drops of foam

safe CA. Clip the control horn backplates onto the tabs at the

tops of the elevons. Add another drop of foam safe CA to each

backplate to hold it in place.