GREAT PLANES YAK-55M Yakovlev Manuale di istruzioni - Pagina 13

Sfoglia online o scarica il pdf Manuale di istruzioni per Giocattolo GREAT PLANES YAK-55M Yakovlev. GREAT PLANES YAK-55M Yakovlev 20. Arf plane

❏

8. Attach strips of adhesive-backed hook material to the

cross members of the battery tray. The adhesive backed loop

material can be attached to the back of the battery. This will

prevent the battery from sliding forward and aft.

❏

9. Overlap by 1" [25mm] two strips of non adhesive

backed hook and loop material. Route the hook and loop

material under the battery tray. Place your flight battery on

the tray and wrap the hook and loop material around the

battery. Trim off the excess material.

Install the Cowl

❏

1. If you have installed the recommended RimFire .32

brushless motor, the cowl louvers will need a 1-3/4" [38mm]

to 1-7/8" [48mm] diameter cutout in the center.

❏

2. Center the cowl louvers in the front of the cowl. While

applying upward pressure on the louvers, wick thin CA along

the joint between the cowl and louvers.

❏

3. Check the fit of the cowl on the fuselage. The cowl is held

on with four magnets. It slides over the fuselage and snaps

into place. Trim the cowl louvers as necessary to prevent them

from rubbing on the motor when the cowl is installed.