GREAT PLANES Power Plane Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico GREAT PLANES Power Plane. GREAT PLANES Power Plane 12.

3. Wrap the old cutter drum in multiple layers of tape and

dispose of it.

4. IMPORTANT: Generously lubricate the cutter shaft using

a thick, lithium base grease prior to installation. Follow

steps 1 and 2 in reverse to install a new cutter. Please be

very careful with a new cutter. The spiral-cut blades are

very sharp.

TROUBLESHOOTING

Problem: The unit fails to operate when plugged into

an outlet and the power buttons are pressed.

Action: Ensure that you are pressing both power buttons

simultaneously. Plug some other appliance into the same

outlet to see if there is power. If there is power, but the unit

fails to operate, unplug immediately and call Hobby

Services at (217) 398-8970 to arrange for a replacement.

Do not attempt to service the electrical portion of the unit

yourself.

Problem: Cutting is slow and difficult.

Reason #1: The cutter may be getting dull. The cutter is

made of mild steel and the spiral blades should remain

sharp for many cuts, but it will eventually become dull,

especially if used on harder materials.

Action: Purchase and install new cutter (GPMR4040).

Reason #2: The material you are attempting to cut is too

hard. The Power Plane was designed and tested for use

on balsa, basswood, poplar, foam and other soft and

medium soft materials. It is not to be used on birch, maple,

oak or other hardwoods.