DayStar Filters SolaREDi 66 Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Telescope DayStar Filters SolaREDi 66. DayStar Filters SolaREDi 66 17.

Knob tuning:

If the image lacks contrast, you may need to adjust the center

wavelength of the filter.

A knob is provided to adjust the center wavelength of the filter. Turn the

knob counter clockwise to lower the wavelength towards the blue by up

to 0.5Å. Turn clockwise to raise the wavelength towards the red by up to

0.5Å. Each click of the knob is 0.1Å.

Additional tuning can be performed, just keep in mind that after every

adjustment of the knob the filter must settle in temperature for

approximately 5-10 minutes before your change becomes effective.

Tuning can also be used to observe Doppler shifted features moving

towards or away from you. A feature moving towards you will be brighter

in blue (counterclockwise) wing shift, away from you will be reddened

(clockwise knob tuning).

Energy Rejection:

Concentrated sunlight can create very high temperatures where it falls,

so care must be taken to prevent melted components or fire.

The SolaREDi 66 includes a blocking filter as the first element to receive

concentrated light. It reflects all but red Hydrogen Alpha light back out of

the front of the telescope, preventing heat from building up inside the

unit.

However, if the telescope is pointed off of the Sun by more than about 1

degree, for example when first setting up the telescope or mount, then

concentrated light can fall on the black metal portions of the inside of the

tube and cause localized heating. We do not recommend leaving the

telescope in this situation for more than a minute.

We recommend

leaving the front cover on the telescope until you are ready to observe.

Please note, a Herschel Wedge or white light filter cannot be used with

the SolaREDi 66. These filters pass very little light by design and so will

result in an extremely dark image if used with the SolaREDi 66.