ADEMCO VISTA 5140XM Manuale d'uso - Pagina 12
Sfoglia online o scarica il pdf Manuale d'uso per Sistema di sicurezza ADEMCO VISTA 5140XM. ADEMCO VISTA 5140XM 15. Commercial fire & burglary alarm system
Stampa la paginaQUICK GUIDE TO ALARM SYSTEM FUNCTIONS
FUNCTION
PROCEDURE
Check Faulted
Press [*]
Zones
Display All
Press and hold [*] for 5 seconds
Descriptors
Arm Burglary
Enter any user code. Press arming
System (if installed)
key desired AWAY, STAY, INSTANT,
MAXIMUM)
Disarm Burglary
Enter any user code. Press OFF [1]
System and/or
Silence Alarms
Bypass zones (fire,
Enter user code. Press BYPASS [6]
burg & system
Enter zone numbers to be bypassed
zones)
(use 2-digit entries).
To remove bypasses, enter code +
OFF [1].
Quick Bypass
Enter user code, Press BYPASS [6]
Press [#]
To remove bypasses, enter code +
OFF [1].
Chime Mode (if
Enter any user code. Press CHIME
burglary system
[9].
installed)
Repeat to turn Chime Mode off.
Burglary Walk Test
Enter master or manager code. Press
Mode (if installed)
TEST [5].
Enter code + OFF [1] to end test.
Fire Drill Test
Enter master code. Press [#] + 69.
To end test, enter code + OFF.
View Messages
Press and hold [0] key for at least 5
seconds.
View User
Enter any user's code. Press [*] + [*].
Capabilities
Add a User
Enter master or manager code. Press
CODE [8]. Enter new 2-digit user
number. Enter 4-digit code for that
user. At prompt, enter authority level.
Change a User
Enter master or manager code. Press
Code
CODE [8]. Enter user's 2-digit
number. Enter new 4-digit code for
that user. Enter 0 (no) at prompt.
Delete a User's
Enter master or manager code. Press
Code
CODE [8]. Re-enter master or
manager's code. Enter 1 (yes) at
prompt.
Self-Help
Press and hold any function key for at
least 5 seconds.
– 22 –
COMMENTS
To view faulted zones when burglary
system not ready to arm.
Displays all zone alpha descriptors
programmed by installer.
Arms system in mode selected.
Disarms system (if armed) and
silences alarms. Repeat to clear
displays.
Bypassed zones are unprotected and
will not cause an alarm if faulted.
Burglary zones can be bypassed by
an operator "A" or higher level user
only. If enabled, fire and system
zones can only be bypassed by a
master user.
Bypasses all faulted zones
automatically.
Console will sound if doors or
windows are violated while burglary
system disarmed.
Activates external sounders for 3
seconds and allows burglary and
non-fire sensors to be tested.
Activates external fire sounders.
Message from central station will
appear.
Displays authority levels assigned to
the user code entered.
Master and manager level users can
add users to the system, each with its
own code and authority level.
Master and manager level users can
change their own or other user's
codes.
Master and manager level users can
delete users. A user can only be
deleted by a user with a higher
authority level.
Will display abbreviated instructions
for the key pressed
5140XM EVENT LOGGING PROCEDURES
The system has the ability to record various events in a history log wherein each event is
recorded in one of five categories (listed below), with the time and date of its occurrence.
The Event Log holds up to 224 events, with the oldest event being replaced by the logging
of any new event after the log is full. Using an alpha console, the Event Log can be viewed
one category at a time, or can display all events, regardless of category (ALL EVENT
LOG). The system also allows selection of displaying the COMPLETE log, or only those
events occurring since the last installer service (RECENT). Note that events are displayed
in chronological order, from most recent to oldest.
TO DISPLAY THE EVENT LOG:
1. Enter any user CODE + [#] + [6] + [0]
2. Select the display mode.
RECENT: Displays only those events
occurring since last installer service.
COMPLETE: Displays complete event
log (up to 224 events).
3. Use the [3] & [1] keys (for next and
previous categories respectively) to
display the categories of events.
Press [8] to select a category and
display the first event. Press [8] again
for each subsequent event.
P1 01/01
12:02AM
Typical Event
BURGLARY
C03
Log Display
Shows burglary alarm occurred in zone
3 (C03), at 12:02AM on January 1.
After the last event has been
displayed, the END OF EVENT LOG
message appears for a few seconds,
then the system automatically displays
the RECENT/COMPLETE mode select
screen again (see step 2).
4. To EXIT the Event Log:
Press [*] at any time.
ENTER 0 = RECENT
1 = COMPLETE
Press the desired key, 0 or 1.
Typical Category
ALARM EVENT LOG
TYPE
CCC UUU
Select Screen
ALARM EVENT LOG
Displays time and date for zones that have
either caused an alarm or have been restored.
CHECK EVENT LOG
Displays time and date for zones that have
caused a trouble or fire supervisory condition.
BYPASS EVENT LOG
Displays time and date for zones that have
been bypassed.
OPEN EVENT LOG
Displays time, date and user number for each
arming and disarming of the system.
SYSTEM EVENT LOG
Displays time and date for system problems,
such as AC Loss, low battery, etc..
ALL EVENT LOG
Displays all categories of events in
chronological order.
– 23 –