HiB 33500 Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Ventilatore HiB 33500. HiB 33500 4. Turbo fans

Mounting Fascia

1. The ventilation should be ducted through the roof space, ducting to an external soffit under the eaves or

grille in the slope of your roof.

2. Mark the position of the fascia with a pencil in a suitable posistion on the ceiling, making sure that it is

between joists.

3. Drill a 9mm hole through the ceiling along the edge of the pencil line. Now cut out the hole with a pad

saw.

4. Hold the fascia against the ceiling and mark the posistion of the fixing holes, fix the unit in place using

suitable fixings- (not supplied)

5. Attach the flexible ducting with the metal hose clamps.

motor body. Follow a simular procedure for the outside wall grille.

the distance to the external grille but the performance will be reduced.

Mounting Fan Unit

Install the Turbo Inline fan within the loft or ceiling space,

insulation. The fan is only suitable for

mount the Fan unit.

g. A horizontal on a wall

Do not run the ducting over the joists, this will cause a build of condensation and reduce the extraction rate.

Ducting can only run between joists, not across them.

horizontal mounting

min 1m

g. B horizontal on a oor

Ensure the ducting is run between joists to create smooth airflow.

Ensure the ducting has a smooth flow towards the

Extra ducting may be used to extend

DO NOT COVER

the motor or LED driver with loft

on a wall or floor. Follow the visual aids below to

Do not mount vertically