HiB Stratus 50 Istruzioni per il montaggio - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per il montaggio per Apparecchiature per il bagno HiB Stratus 50. HiB Stratus 50 4. Led illuminated steam free cabinets

Stampa la pagina

Please Note You may need to remove the door(s) to aid installation. This can be done by unclipping the

hinges. (There is a release catch at the back of the hinge). DO NOT FIT SHELVES AT THIS STAGE.

Extra care must be taken when handling cabinets with mirrored sides or diffusers, especially when

picking up and putting down the cabinet - do not pick up the cabinet by the diffusers.

Fixing Preparation (Fig A)

Fixing Brackets (Fig B)

Wall Hung Installation

1. Position the cabinet in a suitable location

(according to the zonal diagram (Fig 1) on

the back page) ensuring that the mains

supply cable is within reach of the cable

connection point of the cabinet. Carefully

mark the desired position of the cabinet

using a soft pencil, ensuring it is level.

2. Remove the cabinet from the wall and using

a spirit level, mark a horizontal line below

the pencil mark, taking into account the

location of the mounting points (Fig. A).

Place brackets on the pencil line paying

attention to the distance between the

hangers on the cabinet. Carefully mark the

position of the holes using a soft pencil.

(Fig. B).

3. Before drilling, ensure there are no hidden

cables of pipes behind the mounting

points. Using a suitable drill bit, drill holes

REAR VIEW

Mounting Points

location of internal

ﬁxing hole

Hanger Adjustment (Fig C)

in the marked positions to a suitable depth.

4. Insert wall plugs level with the surface of the

wall. If fitting to a tiled surface, wall plugs

should be inserted below the tile surface to

avoid cracking. NB. For plasterboard walls,

specialist fixings should be purchased from

any DIY or hardware store.

5. Fix the brackets to the wall using the screws

provided.

6. Carefully remove the small screws along the

top front edge of the cabinet to gain access

to the internal panel(s). (Fig. C) Keep screws

in a safe place.

7. Temporarily hang the cabinet ensuring the

claws on the hangers are securely located

on the wall brackets. Using a spirit level

adjust the cabinet via the screws on the

hangers. (Fig. C).

8. Mark the position of the internal fixing hole

Angle Adjustment

Claw In/Out

Adjustment