Automated Logic ZS Standard Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Accessories Automated Logic ZS Standard. Automated Logic ZS Standard 16.

This item...

OCC

UnOCC

CO2

UOC

EFF

A number in the

bottom left

corner

NOTE If a number on the display flashes, this indicates that the sensor cannot display the correct value

(for example, the value exceeds the maximum value that the sensor can show).

ZS Sensors

Rev. 4/27/2015

Indicates...

The value shown is outside air temperature or humidity.

Cooling

Heating

The zone's fan is running.

The fan speed. See To manually adjust the fan speed (page 7).

The value(s) in the display, typically setpoints, are editable using the

buttons. If the control program specifies that the value is not editable, you will see

without arrows.

See:

To make the zone warmer or cooler (page 5)

To edit displayed values (page 6)

The sensor is in a timed override. See To override the schedule (page 5).

The equipment is running in an energy-saving mode defined in the control program.

An alarm condition exists. If programmed, the Information screen or Diagnostic

Screen may provide details on the alarm.

A maintenance condition exists. If programmed, the Information screen or

Diagnostic Screen may provide details on the maintenance condition.

The sensor's buttons are locked either because the control program specifies it or

because a user locked them at the sensor. See To lock the sensor buttons (page 6).

The displayed setpoint is an occupied setpoint.

The displayed setpoint is an unoccupied setpoint.

The value shown is CO

The value shown is VOC.

The value shown is the effective setpoint.

A value in the control program that does not have an associated icon. For example,

304 represents the supply air temperature. See Appendix: Rnet tag numbers (page

9) for a list of all numbers and the values they represent.

ALC Proprietary and Confidential

and