Automated Pet Care Products LITTER-ROBOT Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Prodotto per la cura degli animali domestici Automated Pet Care Products LITTER-ROBOT. Automated Pet Care Products LITTER-ROBOT 19. Self-cleaning litter box
Anche per Automated Pet Care Products LITTER-ROBOT: Manuale (16 pagine), Manuale (18 pagine)

Stampa la pagina

Adjusting the Cat Sensor Sensitivity

Note: The cat sensor is set at the factory for

optimal performance for most cats. Adjustment

should not normally be necessary.

1. Make sure that the Globe contains the desired

amount of litter before adjusting the sensor

sensitivity. The maximum litter level is about 2"

below the lower rim of the cat entry opening.

2. Remove the Globe for easier access to the Cat

Sensor Switch. It may also help to remove the

waste drawer from the Base unit.

3. Slightly lift the Base unit and locate the Rotatable

Foot at the front and center of the Base (see figure).

40 W. Howard, Suite B-5, Pontiac, MI 48342

Toll Free: 877-250-7729 Fax: 248-253-1797

www.Litter-Robot.com

More Sensitive – CCW

Less Sensitive – CW

4. TO DECREASE THE SENSOR SENSITIVITY

To decrease the sensor sensitivity, lift the front of

the Base unit and rotate the Rotatable Foot to the

right (about 1 turn at a time – see figure).

5. TO INCREASE THE SENSOR SENSITIVITY

To increase the sensor sensitivity, lift the front of

the Base unit and rotate the Rotatable Foot to the

left (about 1 turn at a time – see figure).

6. Next, if it was removed earlier, slide the waste

drawer back into the Base unit and place the Globe

back on top of the Base. Now, test the function of

the Cat Sensor again.

If the red light stays on after attempting to reset the

unit, the Cat Sensor is too sensitive.

40 W. Howard, Suite B-5, Pontiac, MI 48342

Toll Free: 877-250-7729 Fax: 248-253-1797