Dynacord DMM 4650 Informazioni tecniche - Pagina 17

Sfoglia online o scarica il pdf Informazioni tecniche per Hardware del computer Dynacord DMM 4650. Dynacord DMM 4650 19. Signal processor

Select the input 4 by pressing the indicated cursor key.

The bottom line of the display shows the momentary

setting for the port B, input 4, which would start the

sequence 26.

Programming the start of the sequence 05 you have to

press the indicated key twice to set the blinking cursor to

"6".

Press the indicated cursor key repeatedly until the

display shows the desired number of the sequence

(S05). Pressing the soft key "set" stores your setting into

memory.

From now on, pressing the external button at the input B4 activates the sequence 05 (=3-tone gong

signal).

Pressing the "EXIT" key twice ceases the programming.

The display is dimmed and you are able to test the

functioning of the sequence (example 3).

starttrg B.4 set

H >00,1s dyn S26

starttrg B.4 set

H >00,1s dyn S26

starttrg B.4 set

H >00,1s dyn S05

EXIT